This is a KIT. It is NOT for beginners. You'll be getting raw 3d printed plastic with very little instruction. Things won't just snap together, for example, you'll get door handles but you have to drill the hole to put them in. Same for wipers. The plastic is also very raw with the 3d printing lines showing. You can paint with a thick coat of auto filler primer and then sand to get everything silky smooth, but there are no instructions for any of this.

What you are buying:

1. 3d Printed Body in 3 big pieces - you glue together
2. Windshield wipers
3. Door handles
4. Front emblem
5. Mirrors
6. Bumpers (front and back)
7. Wheels (2 piece, main + ring) with smoothie hubcaps (snap on to wheel nut) (*OPTIONAL)
8. Tires - 3d Printed TPU is a "rubbery plastic" although they are super hard like drifting tires (*OPTIONAL)
9. Windows - Flat Lexan big enough to fit all the windows and a sketchy template
10. Light Lenses, Front x4, Rear x2 - in a transparent PLA so light can shine through

What is NOT included: (required)

1. Chassis - We have this fitting perfectly on a Tamiya Rally Beetle MFX01 chassis
2. Glue - We use regular super glue, shoegoo, and hot glue, depending on the part/need.
3. Sandpaper - We used lots of wet/dry 320-2000
4. Paint
5. Filler Primer - We used rustoleum gray "filler primer" from hardware store
6. Drill
7. Body Mount hardware - We used magnets and 3d printed mounts, can include these as an option at checkout (link here) (*OPTIONAL)